Temperature Sensor Types including Thermocouples, Thermistors, Thermostats and Resistive Temperature Devices.There are four commonly used temperature sensor types: 1. Negative Temperature Coefficient (NTC) thermistor 2. Resistance Temperature Detector (RTD) 3. Thermocouple 4. Semiconductor-based sensors
20D9 NTC ThermistorStrong power and strong capability of surge current protectionCharacteristics Fast response to the rapidly surgeBig material constant (B value)Small remain resistance. High reliability Extensive operating range Operating temp -55℃~+200℃ switching power supply ·UPS power supply, el..
DHT11 Digital Temperature and Relative Humidity Sensor
Features:
Low cost3 to 5V power and I/Omax current use during conversion 2.5mA (while requesting data)humidity Range 20-80% with 5% accuracytemperature Range 0-50°C with ±..
Digital thermostat
temperature controller regulator
DC12V Intelligent digital
thermostat temperature controller regulator With NTC sensor W1401 thermostat
Description:
Temperature
range: -9-99 centigrade Accuracy:
1 centigrade Control
accuracy: 1..
DS1621-Digital Thermometer & Thermostat FEATURESTemperature measurements require no external components.Measures temperatures from -55°C to +125°C in 0.5°C increments. Fahrenheit equivalent is -67°F to 257°F in 0.9°F increments.Temperature is read as a ..
DS18B20 - Digital
Thermometer
Description
The
DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature
measurements and has an alarm function with nonvolatile user-programmable upper
and lower trigger points. The DS18B20 communicates over a 1-Wire bus that by
defin..
Description:Measure temperature and relative humidity using a simple interface that
requires just three wires to the sensor: GND, power, and data. Supported
by an Arduino library that makes it very easy to read values into your
project, so with a single I/O line from your microcontroller you c..
Features
Directly Calibrated to the Kelvin Temperature Scale1°C Initial Accuracy AvailableOperates from 400 µA to 5 mALess than 1-Ω Dynamic ImpedanceEasily CalibratedWide Operating Temperature Range200°C OverrangeLow Cost..
LM35D-Temperature Sensor Description:LM35 is a precision IC temperature (in oC) sensor with its output proportional to the temperature.Temperature range -55°C to 150°C.Output voltage change by 10mV to every oC rise/fall Pin Description: Pin No 1 Supply voltag..
Specifications:
- Dia 4mm,Length 40mm,Leads 500mm
- Resistance of 100 ohms at 0 Celsius and 138.4 ohms at 100 Celsius
- 3-wire configuration, an extra cable which acts exclusively as an output stabilizer.
- Stripped Ends Termination.
- Temperature measurement range: -50℃~300℃..
10KΩ NTC ThermistorDescription and application :10K thermistor with a negative temperature coefficient. Resistance: 10k ohm (25 degrees C)Max. Power dissipation
100mWThermistor Tolerance: -5%
to +5%Mounting Type: Through HoleGood choice for temp-sensing applications.applications include tempe..
Specifications:
Adopt the NTC thermistor sensor, sensitivity is goodThe comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma.With potentiometer to adjust temperature detection thresholdWorking voltage: 3.3 V to 5 VOutput form: digital switch output (0 and..