ESP-01-ESP8266 WIFI Module

ESP-01-ESP8266 WIFI Module

DESCRIPTION:

These modules include 1MB (8Mbit) of flash memory

The ESP8266 Serial/UART to WiFi module is a great way to connect your Arduino or other microcontroller projects to a WiFi network

Create your next internet of things (IoT) project with affordable network connectivity by implementing this module into your design

The module has the ability to run independently of a host controller

The eight-pin header includes two GPIO pins that allow for direct connection of the module to sensors, peripherals, or host controller

Check out our ESP8266 breadboard adapter to use your ESP8266 module with a breadboard

The ESP8266 has 3.6V tolerant I/Os so you will need a logic level converter to connect it with higher voltage devices such as Arduino

The ESP8266 requires 3.3V power so you may need a 3.3V voltage regulator to provide the correct voltage, depending on your setup

SPECIFICATIONS:

• 802.11 b/g/n
• Serial/UART baud rate: 115200 bps
• Integrated TCP/IP protocol stack
• Input power: 3.3V (see "Recommended Accessories" below for 3.3V power options)
• I/O voltage tolerance: 3.6V Max
• Regular operation current draw: 70mA
• Peak operating current draw: 300mA
• Power down leakage current: <10µA
• +19.5dBm output in 802.11b mode
• Flash Memory Size: 1MB (8Mbit)
• WiFi security modes: WPA, WPA2
• Module's dimensions: 24.75mm x 14.5mm