USBASP Firmware on ATmega8L - 8PU Microcontroller
![USBASP Firmware on ATmega8L - 8PU Microcontroller USBASP Firmware on ATmega8L - 8PU Microcontroller](https://onlinetps.com/shop/image/cache/catalog/ItemImages/extrapics/USBASP%20Firmware%20on%20ATmega8L%20-%208PU%20Microcontroller-550x550.jpg)
![USBASP Firmware on ATmega8L - 8PU Microcontroller USBASP Firmware on ATmega8L - 8PU Microcontroller](https://onlinetps.com/shop/image/cache/catalog/ItemImages/extrapics/USBASP%20Firmware%20on%20ATmega8L%20-%208PU%20Microcontroller1-550x550.jpg)
![USBASP Firmware on ATmega8L - 8PU Microcontroller USBASP Firmware on ATmega8L - 8PU Microcontroller](https://onlinetps.com/shop/image/cache/catalog/ItemImages/extrapics/USBASP%20Firmware%20on%20ATmega8L%20-%208PU%20Microcontroller2-550x550.jpg)
![USBASP Firmware on ATmega8L - 8PU Microcontroller USBASP Firmware on ATmega8L - 8PU Microcontroller](https://onlinetps.com/shop/image/cache/catalog/ItemImages/extrapics/USBASP%20Firmware%20on%20ATmega8L%20-%208PU%20Microcontroller-80x80.jpg)
![USBASP Firmware on ATmega8L - 8PU Microcontroller USBASP Firmware on ATmega8L - 8PU Microcontroller](https://onlinetps.com/shop/image/cache/catalog/ItemImages/extrapics/USBASP%20Firmware%20on%20ATmega8L%20-%208PU%20Microcontroller1-80x80.jpg)
![USBASP Firmware on ATmega8L - 8PU Microcontroller USBASP Firmware on ATmega8L - 8PU Microcontroller](https://onlinetps.com/shop/image/cache/catalog/ItemImages/extrapics/USBASP%20Firmware%20on%20ATmega8L%20-%208PU%20Microcontroller2-80x80.jpg)
- Stock: Out of Stock
- Model: TPS-01353
- Weight: 5.00g
Features
• High-performance, Low-power Atmel®AVR® 8-bit Microcontroller
• Advanced RISC Architecture
– 130 Powerful Instructions – Most Single-clock Cycle Execution
– 32 × 8 General Purpose Working Registers
– Fully Static Operation
– Up to 16MIPS Throughput at 16MHz
– On-chip 2-cycle Multiplier
• High Endurance Non-volatile Memory segments
– 8Kbytes of In-System Self-programmable Flash program memory
– 512Bytes EEPROM
– 1Kbyte Internal SRAM
– Write/Erase Cycles: 10,000 Flash/100,000 EEPROM
– Data retention: 20 years at 85°C/100 years at 25°C(1)
– Optional Boot Code Section with Independent Lock Bits
In-System Programming by On-chip Boot Program
True Read-While-Write Operation
– Programming Lock for Software Security
• Peripheral Features
– Two 8-bit Timer/Counters with Separate Prescaler, one Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture
Mode
– Real Time Counter with Separate Oscillator
–– Programmable Watchdog Timer with Separate On-chip Oscillator
– On-chip Analog Comparator
• Special Microcontroller Features
– Power-on Reset and Programmable Brown-out Detection
– Internal Calibrated RC Oscillator
– External and Internal Interrupt Sources
– Five Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, and
Standby
• I/O and Packages
– 23 Programmable I/O Lines
– 28-lead PDIP, 32-lead TQFP, and 32-pad QFN/MLF
• Operating Voltages
– 2.7V - 5.5V (ATmega8L)
– 4.5V - 5.5V (ATmega8)
• Speed Grades
– 0 - 8MHz (ATmega8L)
– 0 - 16MHz (ATmega8)
• Power Consumption at 4Mhz, 3V, 25?C
– Active: 3.6mA
– Idle Mode: 1.0mA
– Power-down Mode Three PWM Channels
– 8-channel ADC in TQFP and QFN/MLF package
Eight Channels 10-bit Accuracy
– 6-channel ADC in PDIP package
Six Channels 10-bit Accuracy
– Byte-oriented Two-wire Serial Interface
– Programmable Serial USART
– Master/Slave SPI Serial Interface
: 0.5µA