Features
• 12-bit resolution
• ±1 LSB max DNL
• ±1 LSB max INL (MCP3202-B)
• ±2 LSB max INL (MCP3202-C)
• Analog inputs programmable as single-ended or
pseudo-differential pairs
• On-chip sample and hold
• SPI serial interface (modes 0,0 and 1,1)
• Single supply oper..
The MCP3421 is a single channel low-noise, high accuracy ΔΣ A/D converter with differential inputs and up to 18 bits of resolution in a small SOT-23-6 package.
The on-board precision 2.048V reference voltage enables an input range of ±2.048V differentially (Δvoltage = 4.096V). The device uses a t..
Features
• 22-bit ADC in Small 8-pin MSOP Package with
Automatic Internal Offset and Gain Calibration
• Low-Output Noise of 2.5 µVRMS with Effective
Resolution of 21.9 bits (MCP3551)
• 3 µV Typical Offset Error
• 2 ppm Typical Full-Scale Error
• 6 ppm Maximum INL Error
..
8-bit A/D Converter
Features
Compatible with 8080 MicroprocessorsEasy Interface to All MicroprocessorsDifferential Analog Voltage InputsLogic inputs and outputs meet both MOS and TTL voltage level specificationsWorks with 2.5V (LM336) Voltage ReferenceOn-chi..
ADC0808 - 8-Bit up Compatible A/D
Converters – WideFeaturesEasy
interface to all microprocessorsOperates
ratio metrically or with 5 VDC or analog spanAdjusted
voltage referenceNo
zero or full-scale adjust required8-channel
multiplexer with address logic0V
to 5V input range with single 5V powe..
ADC0809 - 8-Bit up Compatible A/D
Converters – WideFeaturesEasy
interface to all microprocessorsOperates
ratio metrically or with 5 VDC or analog spanAdjusted
voltage referenceNo
zero or full-scale adjust required8-channel
multiplexer with address logic0V
to 5V input range with single 5V powe..
15000 RPM PMDC MotorDescription:RPM Range=15000*Voltage Range=9-18VNo load Current=1.5Amp
Weight=75gms
Dimensions28mmx40mm) Dia x Length* RPM depends on Voltage rated rpm on 12V..
Specification:
Electrical Data (at No Load Conditions):
Bi-Directional DC Motor (PMDC)
40,000 RPM at 12V DC (No Load Conditions) Minmum Current 1.85Amp (1850 mA)27,000 RPM at 6V DC (No Load Conditions) Minmum Current 0.95Amp (950 mA)These are high RPM, high torque and current motor. There is N..