www.onlineTPS.com
0755-4282750
compare_arrows0

Resistors

  • Sort
    Show only in stock:
more_vertCermet Preset - Variable Resistance pack of 10 pcs
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Cermet Preset - Variable Resistance pack of 10 pcsclose

Cermet preset is a compact variable resistor and PCB mountable with 3 terminal pins. The voltage between the terminal varies as the preset is rotated.The Variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a variable voltage between 0v and Vcc as the rotary cermet is rotated.Cermet Preset - Variable ..

more_vertPreset Variable Resistance
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Preset Variable Resistanceclose

A preset is a three legged electronic component which can be made to offer varying resistance in a circuit. The resistance is varied by adjusting the rotary control over it. The adjustment can be done by using a small screw driver or a similar tool. The resistance does not vary linearly but rather varies in exponential or logarithmic manner. Such variable resistors are commonly used fo..

more_vertResistance 0.01 Ohm 2Watt
₹5.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistance 0.01 Ohm 2Watt close

0.01 Ohm 2Watt Resistance     Description;Product Type : 0.01 Ohm 2Watt Resistance..

more_vertResistance 0.47 ohm - 1 Watt
₹3.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistance 0.47 ohm - 1 Watt close

color : multirated power : 1 wattResistance tolerance : 1%Technology : metal film..

more_vertResistance 3.9K ohm - 5 Watt
₹4.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistance 3.9K ohm - 5 Wattclose

Type: WireWound Power Resistor Tolerance: 5% Size: 5 Watt Value: 3.9KΩ (Ohm) Dimensions: 0.88"L x 0.38"W x 0.38"H (Approximate) ..

more_vertResistance Network  10K ohm - 10 Pin
₹4.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistance Network 10K ohm - 10 Pinclose

Description:-color:blackResistance:10k ohmpins:10Note : Images shown is only for representation. The actual product may vary Slightly with the picture shown...

more_vertResistance Network  4.7K ohm - 10 Pin
₹3.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistance Network 4.7K ohm - 10 Pinclose

         Thick film resistor networks have metal glaze element on the ceramic substrates with strong clip construction terminal, and are coated with special epoxy resin. They are the most suitable to meet the requirement of high density circuit assembling...

more_vertResistance Network 10K ohm - 6 Pin
₹3.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistance Network 10K ohm - 6 Pinclose

Description:These work great as current limiting resistors for rows of LEDs and two of these can replace 10 individual wire-lead resistors when hooking up our 10 LED bargraph displays. They also work well as pull-down resistors for DIP switches...

more_vertResistance Network 10K ohm - 9 Pin
₹3.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistance Network 10K ohm - 9 Pin close

Description:Resistor Network is a passive circuit element that is a combination of multiple resistances in series. We may consider the SIL-Packaged Resistors as a time-saving alternative for individual resistors connected in series. The Resistor Network shown in the above picture is a Single In-Line component which is an 8 individual 10K Ohm resistors that share a common terminal on pin..

more_vertResistances 1/2 Watt Tolerance 5% Pack of 10 Pcs
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistances 1/2 Watt Tolerance 5% Pack of 10 Pcsclose

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. Product type : Resistances 1/2 Watt Tolerance 5% ..

more_vertResistances 1/4 Watt Tolerance 1% Pack of 10 Pcs
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistances 1/4 Watt Tolerance 1% Pack of 10 Pcsclose

Resistsnces are the measure of the degree to which a conductor opposes an electric current through that conductor.Product type : Resistances 1/4 Watt Tolerance 1% ..

more_vertResistances 1/4 Watt Tolerance 5% Pack of 10 Pcs
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Resistances 1/4 Watt Tolerance 5% Pack of 10 Pcsclose

The electrical resistance of an electrical conductor is a measure of the difficulty to pass an electric current through that conductor.Product type :  Resistances 1/4 Watt Tolerance 5% ..

more_vertRotary Potentiometer Dual Deck -Metal Shaft Variable Resistance
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
more_vertRotary Potentiometer Single Deck -Metal Shaft Variable Resistance
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Rotary Potentiometer Single Deck -Metal Shaft Variable Resistanceclose

It is an electronic component. It is applied in an electronic circuit for adjusting circuit resistance to control voltage or current of that circuit or part of that circuit. The electrical resistance is varied by sliding a wiper contact along a resistance track. Sometimes the resistance is adjusted at preset value as required at the time of circuit building by adjusting screw attached to it ..

more_vertRotary Potentiometer Single Deck -Plastic Shaft Variable Resistance
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Rotary Potentiometer Single Deck -Plastic Shaft Variable Resistanceclose

It is an electronic component. It is applied in an electronic circuit for adjusting circuit resistance to control voltage or current of that circuit or part of that circuit. The electrical resistance is varied by sliding a wiper contact along a resistance track. Sometimes the resistance is adjusted at preset value as required at the time of circuit building by adjusting screw attached to i..

more_vertSlide Potentiometers
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Slide Potentiometersclose

slide potentiometer is a simple device used to measure the EMF, TPD, internal resistance of a cell. It consists of a board where a tungsten or manganese wire is fitted on it. It works on the principle that the potential dropped between two points in a wire of uniform cross section is directly proportional to the distance between the points...

more_vertSMD Resistances 1/4 Watt Tolerance 1%  (10 Pc) 1206 Package
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
SMD Resistances 1/4 Watt Tolerance 1% (10 Pc) 1206 Packageclose

SMD Resistances 1/4 Watt Tolerance 1%  (10 Pc) 1206 PackageThe electrical resistance of an electrical conductor is a measure of the difficulty to pass an electric current through that conductor.Product type :  Resistances 1/4 Watt Tolerance 1% ..

more_vertSMD Resistances 1/4 Watt Tolerance 5%  (10 Pc) 1206 Package
₹0.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
SMD Resistances 1/4 Watt Tolerance 5% (10 Pc) 1206 Packageclose

SMD Resistances 1/4 Watt Tolerance 5%  (10 Pc) 1206 PackageThe electrical resistance of an electrical conductor is a measure of the difficulty to pass an electric current through that conductor.Product type :  Resistances 1/4 Watt Tolerance 5% ..

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses.Resistors - the most ubiquitous of electronic components. They are a critical piece in just about every circuit. And they play a major role in our favorite equation, Ohm’s Law.Resistors are usually added to circuits where they complement active components like op-amps, microcontrollers, and other integrated circuits. Commonly resistors are used to limit current, divide voltages, and pull-up I/O lines.