Terminal Blocks

2 Pin Screw TerminalsPitch 5.08 mmRating 250V, 6 – 10ATerminal can accept 30 to 18 AWG wirePin thickness 1.1mm tinned nickel plated..

2 Pin Screw Terminals to DC Jack AdapterAdapts a 5.5 × 2.1 mm DC barrel plugScrew terminals spaced approximately 5.08 mm (pitch)The terminals are labeled positive and negative,The positive terminal connected to the center contact of DC jack...

3 Pin Screw TerminalsPitch 5.08 mmRating 250V, 6 – 10ATerminal can accept 30 to 18 AWG wirePin thickness 1.1mm tinned nickel plated..

6 Screw Terminals to 10 Pin Box Header PCB BoardDescription:6 lm35 temperature sensor to 10 pin box header converterSensor outputs are stabilized with capacitorEach screw terminal center pin is sensor output rest two are GND and VccBox header pin 9 – GNDBox header pin 10 – Vcc (5V)On board power Indicator..

Spade Terminal Female Tin plated brass Maximum voltage 300VIdeal for a variety of electrical terminations and repairs Specifications:Length - 21mmCurrent - 4ACable sizes- 0.4-1.0 mm..

Electrical Wire Terminals O-Type SPECIFICATIONS Category: Ring Terminals Insulation: Non-InsulatedStud Size: 3/8"Wire Gauge: 6 AWGMaterial: Tin-plated copperExtra wire holding strengthAllows for easy wire insertionBrazed seam barrel allows terminal to be crimped in any position around barrel..

Electrical Wire Terminals Y-Type SPECIFICATIONS Category: Non-insulated spade terminalsInsulation: Non-InsulatedStud Size: 3/8"Wire Gauge: 6 AWGMaterial: Tin-plated copperExtra wire holding strengthAllows for easy wire insertionBrazed seam barrel allows terminal to be crimped in any position around barrel..

Jumper HeadersFeatureTwo pin jumpers (shunts)Type: femalePin count: 2Pitch: 2.54mm Application: To make electrical connection between two pin headers (Male)          Commonly used to modify settings on a board or device (pull up, pull down, USB power, input power etc)..