www.onlineTPS.com
0755-4282750
compare_arrows0

Terminal Blocks

  • Sort
    Show only in stock:
more_vert2 Pin Screw Terminal
₹5.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
2 Pin Screw Terminalclose

2 Pin Screw TerminalsPitch 5.08 mmRating 250V, 6 – 10ATerminal can accept 30 to 18 AWG wirePin thickness 1.1mm tinned nickel plated..

more_vert2 Pin Screw Terminal to DC Jack Adapter
₹15.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
2 Pin Screw Terminal to DC Jack Adapter close

2 Pin Screw Terminals to DC Jack AdapterAdapts a 5.5 × 2.1 mm DC barrel plugScrew terminals spaced approximately 5.08 mm (pitch)The terminals are labeled positive and negative,The positive terminal connected to the center contact of DC jack...

more_vert3 Pin Screw Terminal
₹6.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
3 Pin Screw Terminalclose

3 Pin Screw TerminalsPitch 5.08 mmRating 250V, 6 – 10ATerminal can accept 30 to 18 AWG wirePin thickness 1.1mm tinned nickel plated..

Discount 10%
more_vert6 Screw Terminal to 10 Pin Box Header PCB Board
₹50.00₹45.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
6 Screw Terminal to 10 Pin Box Header PCB Board close

6 Screw Terminals to 10 Pin Box Header PCB BoardDescription:6 lm35 temperature sensor to 10 pin box header converterSensor outputs are stabilized with capacitorEach screw terminal center pin is sensor output rest two are GND and VccBox header pin 9 – GNDBox header pin 10 – Vcc (5V)On board power Indicator..

more_vertBattery Clip (Spade Terminals) Female
₹3.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Battery Clip (Spade Terminals) Femaleclose

Spade Terminal Female Tin plated brass Maximum voltage 300VIdeal for a variety of electrical terminations and repairs Specifications:Length - 21mmCurrent - 4ACable sizes- 0.4-1.0 mm..

Discount 33%
more_vertElectrical Wire Terminals O-Type
₹3.00₹2.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Electrical Wire Terminals O-Typeclose

Electrical Wire Terminals O-Type SPECIFICATIONS Category: Ring Terminals Insulation: Non-InsulatedStud Size: 3/8"Wire Gauge: 6 AWGMaterial: Tin-plated copperExtra wire holding strengthAllows for easy wire insertionBrazed seam barrel allows terminal to be crimped in any position around barrel..

Discount 33%
more_vertElectrical Wire Terminals Y-Type
₹3.00₹2.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Electrical Wire Terminals Y-Typeclose

Electrical Wire Terminals Y-Type SPECIFICATIONS Category: Non-insulated spade terminalsInsulation: Non-InsulatedStud Size: 3/8"Wire Gauge: 6 AWGMaterial: Tin-plated copperExtra wire holding strengthAllows for easy wire insertionBrazed seam barrel allows terminal to be crimped in any position around barrel..

more_vertJumper Headers
₹1.00

star_borderstar_borderstar_borderstar_borderstar_border
More detailed
Jumper Headersclose

Jumper HeadersFeatureTwo pin jumpers (shunts)Type: femalePin count: 2Pitch: 2.54mm Application: To make electrical connection between two pin headers (Male)          Commonly used to modify settings on a board or device (pull up, pull down, USB power, input power etc)..

PCB Terminal Block Families.A wide selection of industry standard and unique terminal blocks and barrier strips to support a broad range of wire-to-board and wire-to-wire configurations.