Your shopping cart
Your shopping cart is empty!
Let me help you spend some money :)
Description: Wireless RF Module CC2500 2.4GHz options is suitable for delivering clear channel assessment, data buffering, wake on radio, burst transmissions, link quality indication. Further, it comes with option of Manchester coding of data stream by modulator and decoded by demodulator. Some of its end usage areas include Consumer Electronics, Wireless audio & game controllers as well ..
4 Channel RF Remote Controller Board - 433/315 MHz with RelayTransmitter boardInput voltage – 9V (9V cell) DC 4 switches (for Forward, Backward, Left and Right Robot Control)8-bit address Switch (Rx and Tx both have same Address)Receiver BoardInput voltage – 12V DC (24V DC if Relay Rating 24V)8-bit address Switch (Rx and Tx both have same Address)2X 2 pin screw Terminal to connect 2 motors O..
433Mhz RxTx ModuleFeaturesRange: 100 - 300 MetersRX Receiver Frequency: 433 MHzRX Supply Current: 4mARX IF Frequency: 1MHzLow Power ConsumptionEasy For ApplicationRX Operating Voltage: 5VTX Frequency Range: 433MHzTX Supply Voltage: 3V-5V ApplicationsCollege project Remote ControlsAutomation SystemWireless Security SystemSensor ReportingCar Security System ..
8 Channel RF Remote Controller Board - 433/315 MHz with RelayTransmitter8 switch for 8 direction control4 motor (2x (2 motors in parallel connection)) for basic Robot and 2 motors for other tasksPower Supply – 9V DC (9V cell)4 PIN DIP switch for ADDRESS (*** RX TX have Same ADDRESS)Antenna should straight (-------------)Receiver BoardPower Supply 12V DC – (1.3Ah -7Ah) Battery** For Heavy load Robo..
ESP-01-ESP8266 WIFI ModuleDESCRIPTION:These modules include 1MB (8Mbit) of flash memoryThe ESP8266 Serial/UART to WiFi module is a great way to connect your Arduino or other microcontroller projects to a WiFi networkCreate your next internet of things (IoT) project with affordable network connectivity by implementing this module into your designThe module has the ability to run independently of a ..
ESP-12E ESP8266 WIFI Module Features 802.11 b/g/nIntegrated low power 32-bit MCUIntegrated 10-bit ADCIntegrated TCP/IP protocol stackIntegrated TR switch, balun, LNA, power amplifier and matching networkIntegrated PLL, regulators, and power management unitsSupports antenna diversityWiFi 2.4 GHz, support WPA/..
ESP-201-ESP8266 WIFI ModuleFeaturesSize: 25 x 35mm26 pinsBreadboard compatible pin spacing802.11 b/g/nPower: 3.3VOther Features ESP8266 serial portThe ESP-201 is a breadboard friendly ESP8266 WIFI module.Can be used as the IO moduleAll IO lead outWith antenna, farther than othersIPX interface on boardDLow consumptionPackage Included:1 x ESP8266 ESP-201 Module1x IPX Antenna..
nRF24L01 module is a 2.4GHz transceiver module Pair (2 pcs).Please note that the nRF24L01 work in the 1.9 to 3.6v low voltage , so if you want to connect it to 5V pins which current more than 10mA , please add a 2K resister for limiting.Interface with Arduino. http://playground.arduino.cc/InterfacingWithHardware/Nrf24L01..
Specification:Product name: T5577 cardThe chip type: T5577Storage capacity: 330 bitsWorking frequency: 125 KHZCommunication rate: 9600 bondsReading distance: 5-10 cmReading and writing time: 67 msWorking temperature: - 20 to 55 degree deErasable life: > 100000 timesData storage: 10 yearsDimension: ISO standard thin card/thick card/all kinds of different buttonsPackaging materials: PVC, PET, ABS..
This module directly connects to any microcontroller UART or through a RS232 converter to PC.It gives UART/Wiegand26 output. This RFID Reader Module works with any 125 KHz RFID tags Specifications 5VDC through USB (External 5V supply will boost range of the module)Current: <50mAOperating Frequency: 125KhzRead Distance: 10cmSize of RFID reader module: 32mm(length) * 32mm(width) * 8mm(h..
RFID Tag reader is operated at 125 KHz with serial and Wiegand26output format. An on board switch is provided to select output format. This isa low frequency (125Khz) RFID Reader Serial Out with a range of 8-10 cm. It is acompact units with built in antenna and can be directly connected to the PCusing RS232 protocol. This product is a kind of play and plug device with areading range of 8 to 10 cm ..
RFID EM 18 Reader board with Serial interfacing specifications:can directly interface with FTDI Basic Programmer.Supports with Robo India Basic FTDI basic programmer.Reads 125 KHz.EM18 Module is detachable.Speedy reading of tags/cards.Sounds Beep after sucessful reads.LED indicators for power and reading display.5V operated.9600 Baud rate...
Features• Works with most common RFID Card Reader (Serial and USB)• EM4100 family passive tags• Activating frequency: 125 kHz• Readable from 2 to 5 inches of RFID reader• RoHS Compliant• Keychain tag for attachment ..
This is a plug and play GSM Modem with a simple to interface serial interface. Use it to send SMS, make and receive calls, and do other GSM operations by controlling it through simple AT commands from micro controllers and computers. It uses the highly popular SIM300 module for all its operations. It comes with a standard RS232 interface which can be used to easily interface the modem to micro con..